Short answer
The Viking Hunter GTX is a high leather boot with a Gore-Tex membrane, a 28 cm shaft, a rubberised toe and a rugged rubber sole. It weighs about 1,060 grams per boot in size 42 and has a roomy last that suits wider feet. It keeps your feet dry in wet forest, on the autumn hunt and on muddy trails, and it lasts for many years if you look after the leather.
When it has rained for a week and the forest is wet right up to the knees you want a boot that keeps your feet dry all day. The Viking Hunter GTX is built for that: thick leather, a Gore-Tex membrane, a high shaft and a sole that grips in mud and on wet roots. It is part of our gear, and it is the boot we recommend when the ground is wet and the trip goes through forest.
Viking is a Norwegian shoe brand with long experience of wet Nordic weather, and you can tell in this boot.
Why we recommend it
Dry feet. The Gore-Tex membrane keeps the water out, and the 28 cm high shaft means you can walk through wet moss, mud and shallow streams.
Roomy fit. The last is extra roomy, so the toes have space even with a thick wool sock. It is one of the few boots that fit broad feet straight away.
Built to last. Full-grain leather of about 2.6 mm, rubber around the toe and rand and a rugged rubber sole that can take rocks and roots. And it is not just us who think it lasts – in reviews we have read several people tell of pairs that have lasted fifteen to twenty years.
Good grip. The rugged sole bites in mud, wet rocks and snow, and the rubberised toe protects against kicks against rocks and roots.
Viking Hunter GTX facts
| Facts | Viking Hunter GTX |
|---|---|
| Upper | Full-grain leather, about 2.6 mm |
| Membrane | Gore-Tex |
| Shaft height | 28 cm (size 42) |
| Weight | About 1,060 g per boot (size 42) |
| Last | Roomy, unisex |
| Sole | Rugged rubber sole, EVA midsole |
| Protection | Rubberised toe and rand |
| Insole | Removable, one spare included |
| Colour | Dark brown |
How to choose the size
Viking recommends that the inside length of the boot is 10–15 mm longer than the foot. That leaves room for a thick sock and for the foot to move down a slope without the toes hitting. If you are between two sizes, take the larger. Try the boots on in the afternoon, with the socks you will use on the trail.
If you have a narrow foot the last can feel too roomy. A thicker insole fills it out, but try first if possible.
Break in the boots and look after the leather
Break them in at a gentle pace. The leather is stiff at first. Use the boots on short walks and in everyday life for a few weeks, and they will shape themselves to your foot. A long trip in brand-new boots is a sure way to get blisters.
Dry slowly. After a wet day the boots take a long time to dry, sometimes several days. Take out the insoles, stuff them with newspaper and let them dry at room temperature. Never put them directly next to a stove or a radiator, because the leather can crack.
Wax regularly. Clean the leather with a brush and lukewarm water, let it dry and then wax it with leather grease or wax. It keeps the leather supple and water-repellent.
What you should know before you buy
It is heavy. A little over a kilo per boot is noticeable on a long day. It is a boot for forest, hunting, fishing and muddy trails, not for a light summer hike on dry mountain paths.
A long trek through bog is tough. When the leather has become soaked through after several days in bog the boot breathes less well. For week-long hikes in wet bog, well-fitting rubber boots are sometimes a better choice.
Who is the Viking Hunter GTX right for?
For you who move in forest and countryside in autumn, winter and spring, who hunt or fish, or who want a boot that keeps your feet dry in wet weather. For you with a normal to broad foot. And for you who want a boot that lasts for many years.
With Vidda Pro or GP Pro and a full Mardingtop pack you are ready for a wet autumn week. How to keep your feet warm when it gets cold you can read about in hypothermia and frostbite.
Frequently asked questions
Which size should I choose in the Viking Hunter GTX?
Viking recommends that the inside length is 10–15 mm longer than the foot. If you are between two sizes, take the larger. Try with the sock you will use, preferably in the afternoon when the foot is at its largest.
Does the Viking Hunter GTX fit a narrow foot?
It has a roomy last and suits normal and broad feet best. If you have a narrow foot you may get slack. A thicker insole or an extra sock helps, but try first.
How much does the Viking Hunter GTX weigh?
About 1,060 grams per boot in size 42. It is a heavy boot, but the weight comes from thick leather, a high shaft and a rugged sole that can take many seasons.
Do you need to break in the boots?
Yes. The leather is stiff at first. Use the boots on short walks and in everyday life for a few weeks before a long trip, and they will shape themselves to your foot.
How long does the Viking Hunter GTX last?
A long time if you look after the leather. It is not just us who think it lasts – in reviews we have read several people tell of pairs that lasted more than fifteen years before the sole gave way. Clean, let them dry slowly and wax the leather regularly.
